Piling Solutions

Edgen Murray specializes in the supply of cold rolled and hot rolled sheet piles and tubular steel piles. We provide complete piling solutions, from general advice to full engineering support and design, including accessory packages and value add services such as painting, hot formed clutches, tie rods, and combination piling systems.

A piling solution is a package that includes all elements essential to provide the client with a complete solution to their piling requirements, rather than just supplying a product.

Our piling products are manufactured to international standards by our pre-qualified manufacturers. All sheet piles supplied by Edgen Murray are fully traceable back to raw materials and are fully certified. Material test certificates in accordance with EN 10204 3.1 or 3.2 are routinely supplied with all sheet piles.


Hot Rolled Sheet Piles

Sheet piles, also known as U-type sheet piles or Larssen Sheet Piles are widely used in construction. They can be used in permanent or temporary applications. Edgen Murray has a wide range of hot rolled sheet pile shapes and sizes that can be engineered to each client’s specific application.

Hot rolled sheet piles are produced to EN 10248, JIS A5523 and JIS A5528 standards.

Type Z Sheets, U Sheets, Hat Sheets, Straight Web Sheets
Pile Specification EN 10248, JIS 5523 and JIS 5528
Material SpecificationGrades
EN 10025 S235, S275, S355, S390, S420, S460
JIS A5523   SYW295, SYW390
JIS A5528   SY295, SY390
JIS G3101  SS400, SS490, SS540
ASTM A252  Grade 1, 2, 3
ASTM A572  Grade 42, 50, 55, 60, 65
AS 3678  C350, C450
CSA 40.21  260W, 300W, 350W, 400W
GB/T 700   Q235B
GB/T 1591  Q345B, Q345C, Q390B, Q420B

 

ToleranceBS EN 10248
Mass ± 5%
Length ± 200mm / ± 7.87402“
Height ± 7mm / ± 0.275591
Thickness  ≤ 8.5mm / ≤ 0.334646“ ± 0.5mm / ± 0.019685“
  ≤ 8.5mm / ≤ 0.334646“ ± 6%
Width single ± 2%
Width of pair ± 3%
Straightness ≤ 0.2% of the length
Squareness of end ± 2% of the width

 Cold Rolled Sheet Piles

Edgen Murray sheet piles are produced in accordance with design code EN 1993-5:2007 and the manufacturing standard EN 10249 parts 1 &2. We comply with the structural steel welding requirements of AS/NZS 1554.1 2004.

Edgen Murray has a wide range of cold rolled sheet pile shapes and sizes that can be engineered to each client’s specific application. 

Type CRZ Sheets, CRU Sheets, CRW Sheets, BP Sheets, EU Sheets, Trench Sheets
Pile Specification EN 10249, JIS 5523 and JIS 5528
Material SpecificationGrades
EN 10025 S235, S275, S355, S390, S420, S460
JIS A5523   SYW295, SYW390
JIS A5528   SY295, SY390
ASTM A572  Grade 42, 50, 60
GB/T 1591 Q235B, Q245B, Q345B, Q390B, Q420B

 

ToleranceBS EN 10249
Mass  ± 7%
Length  ± 50mm / ± 1.9685“
Height  h≤200±4mm/±0.15748” 200<h<300±6mm/±0.23622”   300<h<400±8mm/±0.314916” 400<h±10mm/±0.39370” 
Thickness  5mm/0.19685”=±0.29mm  8mm/0.31496”=±0.35mm 10mm/0.39370”=±0.40mm 13mm/0.51181”=±0.46mm
  6mm/0.23622”=±0.31mm 9mm/0.35433”=±0.40mm 12mm/0.47244”=±0.43mm 15mm/0.59055”=±0.46mm
Width single ± 2% ± 2%  ± 2%  ± 2%
Width of pair ± 3%    
Straighness Bending: ≤ 0.25% L
  Curving: ≤ 0.25% L
  Twisting: < 2% L but no more than 100mm
Straightness - Squareness  < 2% W   

Sheet Pile Accessories and Services                      

  • Design Assistance  
  • Pile Shoes
  • Corrosion Coating
  • Tie Rods
  • Hot Formed Clutch Systems
  • Corner and Junction Piles
  • Clutch Systems
  • Engineered Cofferdams
  • Fabricated Steel Bridge Span

Our engineering team has diverse qualifications and experience with civil, structural and geotechnical applications and work with state of the art analysis software and technical publications to meet relevant regional standards.


 

Tubular Steel Piles

We supply fully fabricated piles for marine structures as well as land based stabilization piles, king piles and combi-wall systems, foundation piles and a wide range of pile accessories.

TypeSpecificationGrades
Electric Resistance Weld (ERW) API 5L Grade B, X42, X52, X56, X60, X65, X70
Electric Resistance Weld (ERW) GB/T 1591 Q345
Electric Resistance Weld (ERW) AS 1163 C350-C450
Spiral Weld (SSAW) ASTM A252 Grade 2, 3
Spiral Weld (SSAW) API 5L Grade B, X42, X52, X56, X60, X65, X70
Spiral Weld (SSAW) GB/T 1591 Q235, Q345
Longitudinal Weld (LSAW) ASTM A252 Grade 2, 3
Longitudinal Weld (LSAW) API Grade 2B
Longitudinal Weld (LSAW) GB/T 1591 Q235, Q345
Longitudinal Weld (LSAW) API 5L Grade B, X42, X52, X56, X60, X65, X70
Longitudinal Weld (LSAW) AS 1579 Grade 250, 300
Seamless EN 10225 S355
Seamless ASTM A106 Grade B
Seamless API 5L Grade B, X42, X52, X56, X60, X65, X70

Tubular Steel Pile Accessories

  • Pile Shoes
  • Corrosion Coating
  • Structural Tie Rods
  • Stiffening Rings
  • Shear Keys
  • Lifting Lugs
  • Hot Formed Clutches
  • Pile Fabrication for Combi-walls
  • Splicing and Fabrication to Full Engineered Length
  • Logistics and project management capabilities

Material Properties

Supply Condition                             

Structural steel materials are offered in many supply conditions:

  • As rolled
  • Normalized
  • Quenched and tempered (Q&T)
  • Thermo-mechanically control processed (TMCP)

Certification: EN 10204 3.1 and 3.2 - Lloyds, GL, ABS, DNV, BV

 



Print this page