Plate

Edgen Murray specializes in the supply and distribution of high strength steels suitable for varying applications. All materials are manufactured by globally reputable steel manufacturers and available from regional stocking facilities or project specific production allocations with partner mills.

We also offer a range of clad material and can cut plate to size, as well as offer in-house profiling services, to meet your fabrication and design requirements.

Below you can find a sample of our typical plate offerings for both stock and project specific requirements.

Material Grades - Structural Steel

SpecificationGrades
EN 10025 S275JR/J0/J2, S355JR/J0/J2, S355K2, S355ML/NL, S460ML
ASTM A36
ASTM A572 Grade 50
ASTM A709 Grade 50
ASTM A633 Grade C
AS/NZS 3678 Grade 300, Grade 350L0
Norsok M-120 MDS Y02, Y04, Y05

Material Grades - Offshore Quality Structural Steel (including pre-production qualified steels)

SpecificationGrades
EN 10225 S355G3, S355G7, S355G8, S355G9, S355G10, S420G2, S460G2, S500G2, S500, S690
API 2W/2H Grade 50, Grade 60
API 2Y Grade 60
Norsok M-120 MDS Y15, Y20, Y25, Y30, Y35, Y40, Y45, Y50, Y55
Arctic Steels (Low temperature Charpy V-Notch (LCVN) and higher strength steels)

Material Grades - Shipbuilding Grade Steel

SpecificationGrades
ABS AH36, DH36, EH36, FH36, AH40, DH40, EH40, FH40, AQ51, DQ51, EQ51, AQ56, DQ56, EQ56, AQ63, DQ63, EQ63, AQ70, DQ70, EQ70, FQ70
DNV NV D36, NV E36, NV F36, NVF40, NV D500, NV E500, NV F500, NVE 690, NVF 690
ABS A131 Grade A

Material Grades - Pressure Vessel Steel (including Hydrogen Induced Cracking resistant (HIC) steels for sour service applications)

SpecificationGrades
ASME/ASTM SA/A516 Grade 60/65/70 HIC
ASME/ASTM SA/A537 Class 1
ASME SA387 Grade 11/22, Class 1, 2
ASTM A514 Grade F
ASTM A517 Grade Q
EN 10028 P355NH, P355NL1, P355NL2, P460NH, P460NL1, P460NL2
DIN EN 10028 16Mo3, 13CrMo4-5, 10CrMo9-10
BS 1501 223/224/225 490B LT30 /LT50
ABS A131 Grade A

Material Grades - Stainless Steel

ASTM A240/B625UNSEN DIN 10088-2Material No. (WNr)
304 S30400 X5CrNi18-10 1.4301
304L S30403 X2CrNi19-11 1.4306
304H S30409 X6CrNi18-11 1.4948
310 S31000 X15CrNiSi25-21 1.4841
310S S31008 X8CrNi25-21 1.4845
316 S31600 X5CrNiMo17-12-2 1.4401
316L S31603 X2CrNiMo17-2-2 1.4404
316Ti S31635 X6CrNiMoTi17-12-2 1.4571
321 S32100 X6CrNiTi18-10 1.4541
321H S32109 X8CrNiTi18-10 1.4878
347 S34700 X6CrNiNb18-10 1.4550
347H S34709 X8CrNiNb16-13 1.4961
6Mo S31254 X1CrNiMoCuN25-20-7 1.4529
904L N08904 X1NiCrMoCu25-20-5 1.4539

Material Grades Duplex and Super Duplex

ASTM A240 UNSEN DIN 10028-7Material No. (WNr)
S31260 X2CrNiMoN25-7-4 1.4410
S32900 X3CrNiMoN27-5-2 1.4460
S31803 / S32205 X2CrNiMoN22-5-3 1.4462
S32760 X2CrNiMoCuWN25-7-4 1.4501
S32750 / S32550 X2CrNiMoCuN25-6-3 1.4507

Material Grades - Chrome Moly

Material SpecificationGrades
ASTM A387 Grade 5, 9, 11, 22, 91
EN 10028-2 (Material No. (WNr) 16Mo3 (1.5415)
13CrMo4-5 (1.7335)
10CrMo9-10 (1.7380)
11CrMo9-11 (1.7383)
X10CrMoVnb9-1 (1.4903)
X10CrWMoVnb9-2 (1.4901)

Material Grades - Nickel Alloy

AlloyDINUNSASTMMaterial No. (WNr)
400   N04400 B127 2.4360
600   N06600 B168 2.4816
625   N06625 B443 2.4856
800H/HT   N08811 B409 1.4959
825   N08825 B424 2.4858
  NiMo29Cr N10675 B333 2.4600
  NiCr21Mo14W N06022 B575 2.4602
  NiMo16Cr16Ti N06455 B575 2.4610
  NiMo16Cr15W N10276 B575 2.4819
  NiCr23Mo16Cu N06200 B575 2.4675
  NiCr30FeMo N06030 B582 2.4603
  NiCr33Mo8 N06035 B575 2.4643
  NiMo22Cr15 N10362 B575 2.4708

Specialty material, such as 9% nickel plate for LNG, also available.


Material Grades - Specialty Steels

  • AR400, AR500, Armor Plate
  • Caterpillar Approved Steels
  • Proprietary and Modified Steels

Size Range and Properties

Size Range

Standard Stock Dimensions*:
Length: 12200 mm and 10000mm
With: 3050 mm and 2500 mm
Thickness: 5mm – 300 mm (thickness range might differ based on material grade)

*Project specific dimensions manufactured to order

 
Supply Condition

Structural steel materials are offered in many supply conditions:

  • As rolled
  • Normalized
  • Quenched and tempered (Q&T)
  • Thermo-mechanically control processed (TMCP)
 
Supplementary Requirements

Typical supplementary additions to Euronorm or API standards for Edgen Murray stock:

  • Simulated post-weld heat treated (PWHT) tested
  • Through thickness tested
  • Ultrasonically tested (UTE)
  • Strain age impact tested
  • Charpy impact tested
  • Z value (through-thickness tensile properties) tested (Z-15/Z-25/Z-35)

Additional supplements (or modifications) to international standards can be achieved for project specific requirements. Weldability data and fracture mechanics are available upon request.

 
Certification: EN 10204 3.1 and 3.2 - Lloyds, GL, ABS, DNV, BV



Print this page