Pipe and Fittings

Pipe and Tube


We can provide seamless and welded pipe for onshore, offshore, midstream, power and downstream applications, including line pipe, pipe for high temperature and pressure environments, abrasion resistant and HDPE pipe. We can also supply welded (SAW, ERW/HFI) and seamless tubular pipe for various structural/support uses.

Typical Stock Size Range* (size range may differ based on material grade):
ERW – ½” nominal to 26” OD
SAW – 24” OD to 48” OD (larger on request)
SMLS – ½” nominal to 36” OD

*Larger sizes and project specific dimensions manufactured to order.*
Pressure Equipment Directive (PED) and NACE MRO 0103 and MRO 0175 as applicable.

Material properties for pipe and tube
Supply Condition

Our structural and process materials are offered in many supply conditions, including:

  • PSL1, PSL2
  • Seamless hot and cold finished
  • Rolled and welded, including from HIC plate
  • Annealed
  • Normalized
  • Quenched and tempered (Q&T)
  • Thermo-mechanically control rolled and welded (TMCP)
carbon steel pipe
Type Specification Grades OD Range
Electric Resistance Weld (ERW) API 5L (PSL- 1, PSL – 2), ASTM A25 X42, X52, X60, X65, X70, X80, Grade 2, 3 1/8”-24”
Spiral Weld (HSAW) API 5L (PSL- 1, PSL – 2), ASTM A252, X42, X52, X60, X65, X70, X80, Grade 2, 3 24”-108”
Longitudinal Weld (LSAW) API 5L (PSL- 1, PSL – 2), ASTM A252 X42, X52, X60, X65, X70, X80, Grade 2, 3 24”-60”
Seamless ASTM/ASME A/SA106 Grade B, Grade C 1/8”-36”
Seamless ASTM/ASME A/SA53 Grade A, B 1/8”-36”
Seamless API 5L Grade B, X42, X52, X60, X65, X70 1/8”-36”
Abrasion resistant and Induction Hardened (IH) Pipe
  • Slurry Pipe / Abrasive Resistant Minimum 230 Brinell Hardness
  • Ultra 600 IH, 500IH and 400H
  • Chrome carbide
  • Twin wall IH pipe

Dual-Layer Fusion Bonded Epoxy (ARO) Coated Pipe

  • ASTM D2513 gas pipe
  • ASTM F714 industrial
  • ASTM F3035 industrial
  • C-901 water pipe
  • AWWA C-906 water pipe
  • FM underground firewater
  • API 15LE oil patch pipe


Edgen Murray provides a broad range of fittings, flanges, and other components to complement our extensive pipe and valve offerings.

  • Seamless and welded buttweld fittings (elbows, tees, reducers, caps)
  • Special fittings (induction bends, barred tees)
  • Forged fittings
  • Segmentable fittings
  • Flanges / API flanges
  • Special flanges (spectacle, long weld neck, swivel, anchor, misalignment)
  • Nuts, bolts and gaskets
  • Pile points for civil construction
Material Grades
Product Material Specification Grades
Butt Weld Fittings
  • ASTM A234
  • WPB
Butt Weld Fittings
  • ASTM A860 / MSS SP 75
  • WPHY42, WPHY52, WPHY60, WPHY65, WPHYY70
  • ASTM / A105N / A350
  • A105
  • A694 / MSS SP 44
  • F42, F52, F60, F65, F70
  • AWWA C207
  • Class 1 Table “D”
Pressure Fittings (including Olets, Swage Nipples and Pipe Nipples)
  • A/SA105, A/SA106
Pressure Fittings (including Olets, Swage Nipples and Pipe Nipples)
  • MSS SP-97, MSS SP-95
  • A/SA234 WPB

Coating and Finishing

Edgen Murray’s in-house expertise and experience in the manufacture, supply, and delivery of API coated line pipe to the oil and gas, water and slurry pipeline markets allows us to support you at every step of your project’s lifecycle.

Coatings Layers Characteristics Specifications
Internal Coating
  • Single Layer of Liquid Epoxy
  • FBE
  • Anticorrosive Painting
  • We offer a variety of internal coatings, anti-corrosion options, resistant to many solvents and chemicals, resistant to cathodic disbondment for onshore line pipe applications
  • API 5L9
  • NACE RP0394
Fusion Bonded Epoxy (FBE)
  • Single Layer FBE
  • Long term corrosion protection
  • Good mechanical and chemical protection
  • Max operating temp. -22°F to 230°F
  • API 5L9
  • NACE RP0394
Dual Layer Fusion Bonded Epoxy (ARO)
  • 1 Layers FBE
  • 1 Layer ARO
  • Excellent impact and abrasion resistance
  • Resistance to cathodic disbondment
  • Max operating temp. -22°F to 230°F
  • API 5L9
  • NACE RP0394
Three Layer Polyethylene (3LPE)
  • 1st – FBE
  • 2nd – Copolymer Adhesive
  • 3rd – Polyethylene
  • Long term corrosion protection
  • Very good mechanical protection
  • Max operating temp. -40°f to 185°f
  • CSA Z245.21-02
  • DIN 30670
  • AS 1518
Three Layer Polypropylene (3LPP)
  • 1st – FBE
  • 2nd – Copolymer Adhesive
  • 3rd – Polypropylene
  • High temp corrosion protection
  • Excellent mechanical protection
  • Max operating temp. -4°F to 230°F
  • CSA Z245.21
  • DIN 30670
  • DIN 30678
Concrete Weight Coating (CWC)
  • 1st – Anti-corrosion coating / FBE
  • 2nd – Reinforced Concrete
  • 3rd – Outer Wrap
  • Negative buoyancy and mechanical protection
  • Coating thickness: 0.984” to 5.90”
  • ISO 21809-5:2010
  • 2ND Layer – Powercrete
  • Applied directly on the FBE mainline coating of a pipeline to provide a high-performance protection to the system under rough terrain conditions
  • Manufacturers application recommended procedures
Two Layer Polyolefin

P R I T E C ®

  • 1st – Butyl Rubber Adhesive
  • 2nd – Polyethylene Topcoat
  • Long term corrosion protection
  • Excellent mechanical protection
  • Effective both above and underground
  • Max operating temp. -40 F to 180 F
  • NACE SP0185
  • AWWA C215

Piling Solutions

At Edgen Murray we understand our clients require services that go beyond product supply and we strive to offer turnkey pipe pile solutions that you can trust. Our steel network of certified partners offers material consultation, fabrication & coating services, complex logistics, and document control. We supply fabricated piles for marine structures as well as land-based stabilization piles, foundation piles, and a wide range of pile accessories. However simple or complex your requirements, Edgen Murray provides the products and services that meet your job requirements and schedules.

  • Pipe Pile Accessorie
  • Protective Coatings and Linings
  • Shear Rings and Lifting Lugs
  • Splicing and Delivery of Engineered Lengths
  • Fabrication to AWS D1.1 and DOT Specifications
  • Logistics; Truck, Rail, Barge, and Storage
  • Project Management and Document Control
Type Specification Grades
Electric Resistance Weld (ERW)
  • API 5L
  • Grade B, X42, X52, X56, X60, X65, X70
Spiral Weld (SSAW)
  • ASTM A252
  • Grade 2, 3 and Grade 3 (MOD 50ksi)
Spiral Weld (SSAW)
  • API 5L
  • Grade B, X42, X52, X56, X60, X65, X70
Longitudinal Weld (LSAW)
  • ASTM A252
  • Grade 2, 3 and Grade 3 (MOD 50ksi)
Longitudinal Weld (R&W )
  • API
  • Grade 2B
Longitudinal Weld (LSAW)
  • API 5L
  • Grade B, X42, X52, X56, X60, X65, X70
  • ASTM A106
  • Grade B, C and A333 Grade 6
  • API 5L
  • Grade B, X42, X52, X56, X60, X65, X70


Cutting in the steel industry can take a number of different forms. Edgen Murray has a great deal of experience in the cutting and preparation of steel. Saw services are available through our network of processing partners, where we offer pipe cutting from ½” to 27” OD. Beveling services are also available for up to 48” diameters.

Shot Blasting

Steel surfaces can sometimes exhibit residual mill-scale as a side effect of the production process and storage, as well as oils and greases, which can come from the transportation of materials. Shot Blasting is a method of cleaning steel.  This service is normally carried out to prepare the steel’s surface before applying the coating. Edgen Murray has established relationships with shot blasting and priming facilities for your shot blasting and coating needs.